Arizona White granite machinery products to ensure the quality of the assembly must be in accordance with the provisions of all kinds of Arizona White granite machinery products technical requirements to operate the assembly. Assembly of the different technical requirements of stone machinery products, though not the same, but there are many in the assembly process must abide by the main points of the contract.

1, do a good job cleaning and cleaning parts. Clean-up including the removal of residual casting sand, rust, chips and so on. In particular, some important parts, such as large gantry cutting machine, the cavity should be coated with rust. The part of oil, rust or chip can be attached to the diesel, kerosene or gasoline to clean a washing liquid, and then use compressed air.

2, matching the surface or in connection with the former, generally need to add lubricant. In particular parts of the bearing spindle box parts, elevator parts of the screw nut.

3, matched with the size of parts to be accurate, with the size of the assembly or re-examination should be carried out sampling. For example: the journal and bearing spindle with the site, with the headstock and the bearing hole and the center distance.

4, wheel assembly, requiring co-axle center line of two teeth to be in the same plane and parallel to each other, the tooth should be combined to ensure a normal gap, while the axial displacement ≤ 2MM.

5, the connection should check whether the combination of flat surfaces, with or without distortion, or should be finishing, burr, to ensure close contact joints, flat, not skewed.

6, seals should be pressed into the seal groove parallel, not twisted, broken scratching the sealing surface.

7, the pulley assembly requirements must be parallel to the axis of the two pulleys, round groove center should be positive, offset over the General Assembly so that the tension pulley uneven and accelerated wear caused by belt slippage. V-belt assembly before the same time matching, the length should be consistent, to prevent vibration transmission occurred.